W360 Sophisticated Solutions Private Limited

Pundit Lab / Pundit Lab+ (Portable Ultrasonic Pulse Velocity TestingInstrument)Ultrasonic testing of concrete enables the detection of voids,pipes, and cracks, and also provides information on the uniformity of concrete, cavities, cracks, defects, and slab thickness. Moreover, measuring the pulse velocity reveals insights about the quality of the concrete.Pundit Live Array Pro, Proceq’s revolutionary wireless tomography scanner, is compatible with and connects wirelessly to the Pundit Live app. Thanks to its A.I. and on-site 3D visualization capabilities, it supports the user to assess concrete structures and detect defects faster and easier than ever before.

The Parotester 2 roll hardness tester provides accurate and reliable evaluations of the roll hardness, hardness profile and hardness variation of paper, foil and film rolls. With Proceq’s roll hardness tester, unevenly wound reels can be spotted prior to interruption of operations and cause of quality problems in printing and converting operations.

Features• Type N Original Schmidt: Rebound values are read from a scale for subsequent calculation of the mean.Compressive strength values can be read from a conversion diagram• Type NR Original Schmidt: Rebound values are recorded as a bar chart on a paper strip which has a capacity for4’000 test impacts• Type L Original Schmidt: Handling equals type N, but the type L offers an impact energy three times smaller• Type LR Original Schmidt: Handling equals type NR, but with impact energy three times smaller. The LR alsofeatures a paper strip for recording up to 4’000 test impacts without reloadingApplications• The Original Schmidt is used for the non-destructive measurement of the concrete/mortar compressive strengthcharacteristics• Control of uniform concrete quality• Detection of weak spots in the concrete• The type L/LR Original Schmidt operates with significant lower impact energy, making this test hammer the idealoption for testing thin walled items with a thickness between 50 to 100 mm (2 in. and 4 in.) or for analyzing smallcomponents.

Warranty• Standard 2-year limited warranty on electronic parts of the Original Schmidt• Optional extended warranty periods up to 3 additional years

Dy-206 Pull-Off Tester 6kN(1349 lbf)(346 10 000) including: battery pack, battery charger withy USB Cable, test disc aluminum Dia 50mm/M10, draw bolt M10, torx screwdriver, software, operating instructions, Calibration Certificate & Carrying Case.

Schmidt OS-120PT- Pendulum HammerType PT: Equipped with a larger plunger surface, it is especiallydesigned to test on softer material such as light weightconcrete, gypsum boards and on fresh concrete. It is oftenused to determine the right time to remove formwork.Type PM: Designed to test the mortar joints in brickwork. Ithas a specially developed plunger whose shape ensures theimpacts are applied to the surface of the joint. Based on therebound values the mortar quality can be classified.

SilverSchmidt ST/PC Type N AND SilverSchmidt ST/PC Type ST/PC Type N/L: The world‘s most advance rebound hammer, with unmatched dispersion characteristics, durability and measuring range. Independent validation testing by BAM Germany has shown that the SilverSchmidt’s patented measuring principle has less dispersion than the classical hammers over the entire range. Its inherent impact angle independence removes one possible source of user error completely. Automatic evaluation according to pre-defined statistical criteria and software analysis tools, greatly enhance the uniformity assessment application. All major standards recommend to create mixtures specific curves. Such user defined correlation curves can be downloaded via the powerful Hammerlink software (PC version only) onto the hammer. This, together with on board correction for form factor and carbonation allows the best possible assessment of compressive strength.

Additional Information:

• Item Code: reboundhammer2
• Production Capacity: 100/day
• Delivery Time: 2 weeks

DD 120 CORE CUTTING MACHINE

• Compact, lightweight corecutting unit for extremely easy handling
• Easy to transport core cutting machines and can be set up easily
• More reliable and lower repair costs
• Two-speed gearing in the core cutting machines for optimum speed and torque
• Bi+ quick-release chuck system allows keyless exchange of core bits
• This core cutting machine can be used for Installing pipes for sanitary, heating and air conditioning
• This core cutting machine can also be used for Installing water supply and waste water pipes
• Make openings for cable trays using this efficient core cutting machine
• This core cutting machine can also be used to set  large-diameter anchors and reinforce bars
• Install railings and barriers using this core cutting machine